Panbase Q & A

 

Q1: Can a second Remote Control Panbase be configured to have a different frequency to avoid simultaneous operation?

A1: No. All Panbase units are preset at 433Mhz & cannot be changed to another frequency. If more than one Panbase is to be used, then they must operate & pan simultaneously when any one remote controller is used. To separate the pan/rotation direction of each individual unit, begin by mounting the desired camera onto Panbase no.1, turn it on, & adjust the camera direction. Turn off with the RC.

Next, mount another camera onto Panbase no.2, turn it on, & adjust the camera direction. Turn off with the RC. Repeat steps with additional Panbase units. Use any RC to turn both Panbase units on at once. They now have a different panning direction. Finally, push the RC’s left/right buttons to have each Panbase continue to pan/rotate at the preset directions.